Filter
Top Products
Setting up the Stereo Power Amplifier
9
Rear panel
The diagram below shows the rear panel connections.
Outputs
The output terminals should be connected to loudspeakers of
4Ω to 15Ω, using either banana plug or bare wire connections.
Each channel of the 555 Stereo Power Amplifier provides twin
outputs for bi-wiring. On speakers that provide separate
Connecting the stereo power amplifier
connections to the bass/mid and tweeter units this allows the
units to be connected independently to the stereo power
amplifier, for optimum sound quality.
Alternatively, for loudspeakers providing a single pair of inputs,
either of the output terminals can be used.
OFF ON
Input (L)
INPUT INPUT
Output - (L) Input (R)
Output + (L)
Output - (R)
Output + (R)