9
NOTES:
• Programming is the ability to preselect the order in which a series of tracks will be played.
• Each track may be stored in the program memory as many times as desired (up to 32 tracks).
• As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the SKIP
/Search
o or n button.
• The CD player will stop after all programmed tracks have been played or the STOP (
■) button is
pressed.
• To cancel programmed playback, press the STOP (
■) button while in the stop mode, or open the CD
Door.
• To check the program, press the PROGRAM button once more: "01" will appear in the display, then the
first selected track will blink in the display. Press the PROGRAM
button again: "02" will blink in the
display, then the second selected track will blink in the display. Press PROGRAM button repeatedly to
check the other programmed tracks.
• After you have selected 32 tracks (the last programmed memory) and press the PROGRAM button to
confirm, the display will show "01" for 1 second, then the first selected programmed track will blink in the
display.
TO PROGRAM THE MEMORY (UP TO 32 TRACKS)
Press the POWER button 1 to the
in position and slide the Function
switch 2 to the CD position. Insert
a CD as described in the TO
INSERT A CD section on page 6.
1
2
1
Use the SKIP/Search (o) 1 or
(
n) 2 button to select the first
track to be programmed.
1
2
3
Press the PROGRAM button; the
PROGRAM indicator will blink.
2
Press the PROGRAM button
again; the selected track has now
been programmed and counted as
program 1.
4
Press the PLAY/PAUSE (®p)
button to begin playback; the
Program indicator will light and
the tracks will play in the order
programmed.
6
Repeat steps 3 and 4 to program
the other desired tracks in
sequence (up to 32 tracks).
1
2
5
COMPACT DISC (CD) OPERATION (CONTINUED)