Filter
Top Products
5
OPERATING INSTRUCTIONS
Press the TUNER Function button
to turn the unit on and select the
Tuner mode.
1
If you press and hold the
TUNING/Skip/Search UP ❶ or
TUNING/Skip/Search DOWN ❷
button for one second, then
release, the unit will automatically
scan to the next broadcasting
station.
1
2
4
For an enhanced Bass sound,
press the X-BASS button ❶.
Adjust the VOLUME ❷ as
desired.
2
1
5
Press the POWER OFF button to
turn the radio off.
6
Use the TUNING/Skip/Search UP
❶ or TUNING/Skip/Search
DOWN ❷ button to select the
desired AM or FM station. When
a strong FM Stereo signal is
received, the FM Stereo ( )
indicator will light.
1
2
3
Press the AM/FM Band button ❶
to select AM or FM. Noise present
in FM broadcasts can be reduced
by pressing the REPEAT/FM
MONO button ❷; “MONO” will
appear in the display and the
broadcast will be in mono.
2
1
2
HINTS FOR BETTER RECEPTION
FM - Make sure that the telescopic FM Rod Antenna is raised and extended to its full length. You may have
to vary the direction of the antenna to find the strongest signal for each FM station.
AM - The AM ferrite bar antenna is located inside the cabinet. It may be necessary to turn the unit slightly so
that the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to
find the position that provides the strongest reception for each of your favorite AM stations.
HEADPHONES JACK
For private listening, plug headphones (not included) into the Headphones jack. The speakers will be
disconnected when the headphones are plugged in.
LISTENING TO THE RADIO
MP3830O/M.QXD 2/14/03 7:56 AM Page 5