Filter
Top Products
10
To repeat a single track, press the
REPEAT/MEM-UP button ❶ once
while in the Stop mode; REPEAT
will blink in the display. Press the
TUNING/SKIP/Search UP ❷ or
DOWN ❸ button to select the
specific track that you wish to
repeat. When the desired track
number appears in the display,
press the PLAY/PAUSE ( )
button ❹ to begin playback. The
specific track you selected will be
repeated continuously. You can
press the REPEAT/MEM-UP button
❶ once during playback to repeat
the current track continuously.
2
4
1
3
1
To cancel Repeat Playback,
press the REPEAT/MEM-UP
button until the Repeat indicator
disappears from the display.
3
To repeat all of the tracks on a
disc continuously, press the
REPEAT/MEM-UP button ❶ twice
while in the Stop mode; REPEAT
will appear in the display. Press
the PLAY/PAUSE ( ) button ❷
to begin playback; all the tracks
on the CD will repeat
continuously.
2
1
2
TO REPEATEDLY PLAY BACK ONE TRACK/ALL TRACKS
Press the POWER ON/OFF
button ❶ to turn the unit on.
Press the CD Function button ❷
to select the CD mode.
2
1
1
Press the MEMORY/CLOCK ADJ
button; “P-01” (Program Number)
and “1” (track number) will appear
and “MEMORY” will blink in the
display.
3
Open the CD compartment lid by
pressing the CD Door OPEN/
CLOSE area and insert your disc
in the CD player. Close the CD
compartment door.
2
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
MP3223.QXD 3/3/03 9:53 AM Page 10