Filter
Top Products
41
iPod CONNECTION
iPod AUDIO AND VIDEO
CONNECTING AN iPod THAT DOESN'T HAVE A DOCKING CONNECTOR
If you own an early model iPod that doesn't have a docking connector or a different brand of MP3 player, you can still
connect the sound output to your system via the AUX jack on the rear of this unit as follows:
1. Using a 3.5 mm stereo plug to twin phono cable (not supplied), connect one end of the cable to the headphone jack of
the iPod or MP3 player, and the other end to the AUX jacks on the rear of the unit.
2. Press SOURCE or AUX Mode button to select AUX IN mode.
NOTES:
• The volume control of the iPod/MP3 Player must be turned up when playing through the AUX input.
• An iPod without a docking connector cannot be controlled from the buttons on this unit.
• When the iPod is connected, it will be charged. If the DVD player is in the ECO mode, it will not charge.
• When the iPod is connected to this unit, it will be in the Pause mode.
TV
MAINUNIT
AUDIO OUTPUT
VIDEO OUTPUT
IPOD
VIDEOIN
DIN CABLE
(Included)
VIDEO CABLE
(Included)
You must insert the universal dock supplied with your iPod onto
the docking station before docking your iPod.
iPod AUDIO ONLY
If you have docked a Video
iPod, the video output is
available from the Video Out
jack on the back of the dock.
Connect a single video cable
from this jack to the
composite video (CVBS)
input of your TV/monitor to
watch the video.