9
OPERATION (CONTINUED)
Extend the AM Loop Antenna wire
(length is approx. 3 ft).
1
USING THE RADIO
For FM reception, fully extend the FM Wire Antenna for best FM reception.
For AM reception, there is an AM Loop Antenna included; connect the AM
Loop Antenna, as shown below, before listening to the AM radio for better
reception.
Connect the AM Loop Antenna
adapter to the AM Loop Antenna
jack at the rear of the main unit.
Make sure the adapter is inserted
correctly into the jack, as shown.
2
At the bottom of the AM Loop
Antenna, rotate the stand to the
rear and then push the stand to
the front.
3
Insert the tabs into the gaps in the
stand. Remember to fully extend
the AM Loop Antenna wire and
locate it approx. 3 ft. away from the
main unit for better reception.
4