Filter
Top Products
10
After you insert the disc into the CD
player and the total number of tracks
appear on the display, you may press
either the CD
Skip/Search ( ) ❶
or ( ) ❷ button
to select a specific
track for playback.
1
2
1
You can also use the Direct Track
Selection buttons ❶ on the
remote to directly select a track. If
the track is over 9, press the
OVER button ❷ first.
2
1
2
When the desired track number
appears in the display, press the
PLAY/PAUSE (❿ ) button.
Playback will begin on the track
you selected.
3
During CD playback, if you wish
to pause the disc momentarily,
press the PLAY/PAUSE (❿ )
button again. Playback stops but
the disc continues to spin and the
time display will blink.
1
Press the PLAY/PAUSE (❿ )
button again to release pause and
resume normal CD playback.
2
CD PAUSE CONTROL
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
During playback, depress and
hold either the CD Skip/Search
( ) or ( ) button to move the
player forward or backward within
a track to locate a specific
musical passage. The player will
move forward or backward at high
speed as long as the button is
depressed. When you release the
CD Skip/Search ( ) or ( )
button, normal playback will
resume at that point.
During playback, press the CD
Skip/Search ( ) button once to
advance the player to the
beginning of the next track. Press
the CD Skip/Search ( ) button
repeatedly to advance the player
to higher number tracks.
1 3
During playback, press the CD
Skip/Search ( ) button once to
move the player back to the
beginning of the current track. Press
the CD Skip/Search ( ) button
repeatedly to move the player back
to lower numbered tracks.
2
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH ( / )
OPERATING INSTRUCTIONS (CONTINUED)
MX3900.O/M.QXD 4/30/02 11:08 AM Page 10