Filter
Top Products
12
Press the Tuning/CD SKIP/Search
() ❶ or ( ) button ❷ to select
the first track that you wish to
program. When the desired track
number appears in the display,
press the MEMORY/PROGRAM/
CLOCK SET button ❸ again.
1
3
2
4
Press either the Tuning/CD SKIP/
Search ( ) ❶ or ( ) button ❷
to select the next track you wish to
program.
When the desired track
number
appears in the display,
press the MEMORY/PROGRAM/
CLOCK SET
button ❸ again.
1
3
2
5
Repeat step 5 until you have
programmed up to 20 track
numbers into the CD Program
Memory.
1
3
2
6
After programming up to 20 tracks in the CD Program Memory, press
the PLAY/PAUSE (❿ ) button ❶ to begin programmed playback.
“MEMORY” will appear in the display and playback will begin on the
first track that you programmed. The player will continue to play all of
the tracks that you programmed in the order in which you programmed
them. When the last programmed track has been played, the player
will stop and the display will again show the total number of tracks on
the disc. To cancel the Programmed Playback mode, press the
MEMORY/PROGRAM/CLOCK SET button ❷ to enter the program
mode, and then press the BAND/STOP (■) button ❸.
1
2
3
7
It is also possible to use the Program
and Repeat functions together to
repeat a specific program indefinitely.
First, program the tracks you wish to
hear in the order you wish to hear
them, as described above. Then,
press the REPEAT/PRESET UP
button twice. Both the MEMORY and
REPEAT indicators will appear in the
display.
1
Press the PLAY/PAUSE (❿ )
button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
2
Program Repeat operation will
continue indefinitely until you
press the BAND/STOP (■)
button.
3
PROGRAMMED REPEAT
OPERATING INSTRUCTIONS (CONTINUED)
MX3720.O/M.QXD 4/30/02 10:48 AM Page 12