Memorex MX3710 Stereo System User Manual


 
6
OPERATING INSTRUCTIONS
With the power off, press and
hold the MEMORY/TIME SET
button; “24H” will blink.
1
Press the MEMORY/TIME SET
button and the hours will blink.
3
Press the TUNING/CD SKIP/
SEARCH ( ) or ( )
button to set the unit to the 24
hour (24H) mode (also known as
military time, or 12 hour (12H)
mode.
1
2
2
SETTING THE CLOCK
Press the PRESET EQ button to
cycle through the preset EQ
settings, or to turn the EQ off.
Each press of the PRESET EQ
button will cycle as follows:
CLASSIC, ROCK, POP, Off.
1
PRESET EQ
In the Off mode, press the
DISPLAY button to cycle from the
clock to the timer. In the On
mode, press the DISPLAY button
to cycle from the selected function
to the clock and to the timer.
1
DISPLAY BUTTON
To listen to the unit through
headphones, simply insert the
headphones (not included) into the
Headphones jack. The speakers
will be disconnected when the
headphones are plugged in.
1
HEADPHONE JACK
Press the TUNING/CD SKIP/
SEARCH ( ) or ( )
button to set the current hour,
then press the MEMORY/ TIME
SET button again; the minute
digits will blink.
3
2
1
4
Press the TUNING/CD SKIP/
SEARCH ( ) or ( )
button to set the current minute.
Press the MEMORY/TIME SET
button and the time will be set.
3
2
1
5
NOTE: In the 12 hour mode the
display will show AM and PM
indicators. In the 24 hour mode
there are no AM or PM indicators.
“1:00PM” is displayed as “13:00”,
“6:00PM” is displayed as “18:00”
and 12 midnight is displayed as
“0:00”. The 12 hour mode is used
in the USA and Canada. The 24
hour mode is used in Europe, Asia
and other countries.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 6