Filter
Top Products
11
OPERATION (CONTINUED)
Press the DISC SKIP button to rotate the
carousel and select a disc.
1
1
DISC SKIP
Connect an external unit to the AUX/VIDEO IN jacks
on the rear of the unit. Rotate the FUNCTION switch
1 to the AUX position to output the external unit’s
sound through this unit’s speaker(s). To output the
external unit’s video through this unit’s monitor, rotate
the FUNCTION switch
1 to the AUX position and the
MONITOR ON/OFF switch 2 to the ON position.
2
1
1
USING AN EXTERNAL UNIT
Gently pull out the Monitor Angle control and
rotate to adjust the viewing angle of the
monitor.
1
1
MONITOR ANGLE CONTROL
Rotate to the ON position to turn the monitor
on. Rotate to the OFF position to turn the
monitor off.
1
1
MONITOR ON/OFF SWITCH
Slide the SPEAKER switch on the rear of the
unit to the desired position for the audio output:
FRONT: Front speaker only.
FRONT & BACK: Both speakers.
BACK: Back speaker only.
1
1
SPEAKER SWITCH
To insert discs, press the POWER button 1 to turn the unit on and
rotate the FUNCTION switch
2 to the CD/CDG position. Press the
OPEN/CLOSE button
3 to open the CD carousel door and insert
CDs with the label side facing upward. Note the disc location
number(s) in the compartment as they correspond to the DISC 1, 2
and 3 buttons. Press the DISC SKIP button
4 to rotate the tray
and insert a third disc (if desired). Press the OPEN/CLOSE button
3 to close the CD carousel door. To remove discs, when in
CD/CDG Stop mode, press the OPEN/CLOSE button
3 to open
the CD carousel door and remove the discs. Press the DISC SKIP
button
4 to rotate the tray and remove the other disc. Press the
OPEN/CLOSE button
3 to close the CD carousel door.
1
2
4
3
1
INSERT/REMOVE DISCS