Memorex MKS5012 Stereo System User Manual


 
6
CONNECTIONS (CONTINUED)
CONNECTING THE UNIT TO A TELEVISION AND A RECEIVER/HOME STEREO
From
Audio
(Aux)
Out
To
Video
In
TELEVISION
From
Video
Out
To
Audio In
RECEIVER OR HOME STEREO
NOTES FOR CONNECTING TO A TV AND A RECEIVER/HOME STEREO:
Connecting the unit to a receiver/home stereo will allow you to broadcast the unit’s sound through the
receiver/home stereo's speakers. If playing a CD+G disc, you will also see video and lyrics when
connecting the video cables to the TV.
When connecting the unit, refer to the owner’s manual of the TV and receiver/home stereo, as well as
this manual.
When connecting the unit, make sure the power is off and both units are unplugged before making any
connections.
If your TV does not have a Video in jack, you can use an RF modulator (not included).
CONNECTING THE MICROPHONE(S)
This unit has two microphone jacks, use them with the supplied microphones, which will allow you to sing
along with your favorite songs. Before connecting, make sure the MIC VOLUME controls are set to
minimum.
If only connecting one microphone, connect it to the MIC A jack.
MKS5012.O/M.QXD 7/15/02 7:00 AM Page 6