Memorex MD6810PLL CD Player User Manual


 
14
CD OPERATION (CONTINUED)
With a CD inserted, press the
PLAY/PAUSE ( )/POWER ON
button to turn the unit on and press
the STOP ()/POWER OFF button to
stop auto playback. Press the PROG
button ; the PROG indicator will
appear in the CD display.
1
3
2
1
Select the first track to be played back
using the
SKIP/SEARCH or
button
, then press the PROG button
again. Repeat this step to program
additional tracks up to a maximum of
24 tracks.
1
3
2
2
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Press the PLAY/PAUSE ( )
/POWER ON button to begin
programmed playback and adjust the
VOLUME control and DBBS switch
as desired.
1
2
3
3
To skip forward or backward through
the programs, press the
SKIP/SEARCH or button
.
When the disc is through playing, it
will stop.
2
1
4
NOTES:
Press the
STOP ()/POWER OFF button
to stop the disc before it is nished.
As each program is played, the track number is shown in the display.
To clear the memorized program either 1)
press the
STOP ()/POWER OFF
button
again while in the stop mode, wait approximately 60 seconds and the unit
will turn off or 2) open the CD compartment.
Programming is the ability to preselect the order in which a series of tracks
will be played.
Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
MD6810.PLL.O/M.QXD 6/11/03 2:58 PM Page 14