Filter
Top Products
9
CD OPERATION (CONTINUED)
With a CD inserted, press the
Play/Pause ( )/Power On button ❶
to turn the unit on and press the
Stop
(■)/Power Off button ❷ to stop auto
playback. Press the PROGRAM button
❸; the PROG indicator will blink in the
CD display.
2
1
3
1
Select the first track to be played back
using the Skip/Search ❶ or
button ❷
, then press the PROGRAM
button
❸ again. Repeat this step to
program additional tracks up to a
maximum of 24 tracks.
2
1
3
2
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Press the Play/Pause ( )/Power On
button ❶ to begin Program playback
and adjust the VOLUME control ❷ and
BASS switch ❸ as desired.
2
3
1
3
To skip forward or backward through
the programs, press the Skip/Search
❶ or button ❷
.
When the disc is
through playing, it will stop.
2
1
4
NOTES:
• Press the
Stop (■)/Power Off button
to stop the disc before it is finished.
• As each program is played, the track number is shown in the display.
• To clear the memorized program:
press the
Stop (■)/Power Off button
again
while in the stop mode, wait approximately 60 seconds and the unit will turn off or
open the CD compartment.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
MD3026.O/M.QXD 3/21/02 4:01 PM Page 9