Filter
Top Products
6
INSTALLATION
MOUNTING THE UNIT ON
THE BASE
To use this unit with the
supplied base, simply insert
the base into the hole on
the bottom of the unit, then
rotate the base 90° to
attach the base to the main
unit as shown in figure 1.
REMOVING THE UNIT
FROM THE BASE
To remove unit from base,
simply press in on the tab
located at the bottom of the
base and lift up the unit as
shown in figure 2.
SPLASH RESISTANT: DO NOT use this unit under direct
water flow. This unit is splash resistant, meaning it can
withstand small splashes of water.
Figure 2
Figure 1