Filter
Top Products
4. Press PROGRAM to store the selected
track.
Erasing a Programmed
Sequence
~
You can do any of the following to erase a
programmed sequence:
Press OPEN/CLOSE before or after
programmed play.
Press POWER. The POWER indicator off.
5. Repeat Steps 3 and 4 to program up to
20 tracks.
Note: You cannot store more than 20.
tracks. If you try to program a 21 st track,
the system does not store it.
6. Press PLAY/PAUSE to play the
programmed tracks. The first track
number appears on the display with the
elapsed time of the track in play.
7. Programmed play automatically stops
at the end of the last programmed track.
To stop the CD/CD+G's total number of
tracks and playing time appear.
Reviewing/Replacing a
Programmed Sequence
While play is stopped, repeatedly press
PROGRAM to review the programmed
sequence.
To replace a programmed track, press
PROGRAM until the position number of
the track you want to replace appears.
Then repeat Steps 3 and 4 to select and
store the new track.
18