Filter
Top Products
9
Rear Panel Connections
Connect the XLS112 power
cord to a live AC outlet. Refer
to information on the back
panel to determine the correct
voltage
POWER CONTROL IN
receives turn on/off sig-
nals from a McIntosh
component and the
POWER CONTROL OUT
sends the turn on/off sig-
nal to the next McIntosh
component
Main Fuse holder, refer
to information on the
back panel of your
XLS112 to determine
the correct fuse size
and rating
INPUTS L (Left) and R
(Right) Unbalanced Jacks or
MONO (Monaural) Balanced
Connector accepts signal
from the output of a A/V
Control Center or Audio Con-
trol Center
POWER Switch Turns
AC power Standby/On
and Off
LEVEL Control
allows adjustment of
acoustic output to
balance with the
other Loudspeakers
LOW PASS Filter selects
the low frequencies sent
to the XLS112’s Power
Amplifier
STATUS LED Indicator illuminates RED when the
XLS112 is in the Standby Mode, GRN (Green)
when Power is ON and ORN (Orange) during the
time the Power Guard Circuit has activated
PHASE reversing
switch to help avoid
phase cancellation
OUTPUTS L (Left) and R
(Right) Unbalanced Jacks or
MONO (Monaural) Balanced
Connector provides signal to
the next Powered Subwoofer
or Power Amplifier