Filter
Top Products
9
How to Connect
How to Connect
McIntosh Control Center
1. Connect a data cable from the TUNER 1 DATA IN jack
to the TUNER DATA PORT of a McIntosh Control
Center or preamplifier.
2. Connect a power control cable from the POWER CON-
TROL IN jack to the POWER CONTROL OUT or
ACC jack of a McIntosh Preamplifier, Control Center
or other McIntosh component.
3. Connect shielded cables from the TUNER 1 FIXED
OUTPUTS to the TUNER INPUTS of a preamplifier
or control center.
Note: An optional connection would be to use the TUNER 1
VARIABLE OUTPUTS.
4. Connect the FM Antenna or Cable (from the Cable
Company) to the MR85 Tuner 75W (Ohm) FM
ANTenna connector.
5. Connect with the supplied cable, from the 5 Pin Socket
of the McIntosh RAA1 Remote AM Antenna to the
MR85 Tuner AM ANT DIN socket.
6. Plug the MR85 AC Power Cord into a live AC Outlet.
To AC Outlet