MartinLogan The Quest Speaker System Speaker System User Manual


 
Page 22
Quest User's Manual
No OutputNo Output
No OutputNo Output
No Output
Check that all your system components are turned on.
Check your speaker wires and connections.
Check all interconnecting cables.
Weak Output, Loss of HighsWeak Output, Loss of Highs
Weak Output, Loss of HighsWeak Output, Loss of Highs
Weak Output, Loss of Highs
Check the power cord. Is it properly connected to the
speaker?
Exaggerated Highs, BrightnessExaggerated Highs, Brightness
Exaggerated Highs, BrightnessExaggerated Highs, Brightness
Exaggerated Highs, Brightness
Check the toe-in of the speakers. Read
Room Place-Room Place-
Room Place-Room Place-
Room Place-
mentment
mentment
ment for more information.
Muddy BassMuddy Bass
Muddy BassMuddy Bass
Muddy Bass
Check placement. Try moving the speakers closer to the
front and side walls.
Check the type of feet being used. Try attaching the
coupling spikes.
Lack of BassLack of Bass
Lack of BassLack of Bass
Lack of Bass
Check your speaker wires. Is the polarity correct?
Check the Bass Contour switch. Is it in the -3dB position?
Check the Bi-wire/Bi-amp switch. Is it in the correct
position?
Troubleshooting
Poor ImagingPoor Imaging
Poor ImagingPoor Imaging
Poor Imaging
Check placement. Are both speakers the same distance
from the walls? Do they have the same amount of toe-
in? Try moving the speakers away from the front and
side walls.
Check the polarity of the speaker wires. Are they con-
nected properly?
Popping and Ticking Sounds, Funny NoisesPopping and Ticking Sounds, Funny Noises
Popping and Ticking Sounds, Funny NoisesPopping and Ticking Sounds, Funny Noises
Popping and Ticking Sounds, Funny Noises
These occasional noises are harmless and will not hurt
your audio system or your speakers. All electrostatic
speakers are guilty of making odd noises at one time or
another.
These noises may be caused by dirt and dust particles
collecting on the speaker, by high humidity or by AC line
fluctuations that may occur in your area.
Dirt and dust may be vacuumed off with a brush attach-
ment connected to your vacuum cleaner or you may
blow them off with compressed air.
DO NOT SPRAY ANY KIND OF CLEANINGDO NOT SPRAY ANY KIND OF CLEANING
DO NOT SPRAY ANY KIND OF CLEANINGDO NOT SPRAY ANY KIND OF CLEANING
DO NOT SPRAY ANY KIND OF CLEANING
AGENT ON OR IN CLOSE PROXIMITY TO THEAGENT ON OR IN CLOSE PROXIMITY TO THE
AGENT ON OR IN CLOSE PROXIMITY TO THEAGENT ON OR IN CLOSE PROXIMITY TO THE
AGENT ON OR IN CLOSE PROXIMITY TO THE
ELECTROSTATIC ELEMENT.ELECTROSTATIC ELEMENT.
ELECTROSTATIC ELEMENT.ELECTROSTATIC ELEMENT.
ELECTROSTATIC ELEMENT.