Filter
Top Products
16
SPECIFICATIONS
MLT-1 SPEAKER
System Frequency Response
125–20,000 Hz ± 2db
Sensitivity
87 dB@2.83 volts/meter
Impedance
8 Ohms compatible
Crossover Frequency
2000Hz
Tweeter Type
1” (2.54 cm) soft dome
Woofer Type
3.5” (8.9cm) high rigidity poly cone
with extended throw drive assembly
Enclosure Type
Non-resonance asymmetrical
chamber format, sealed
Power Handling
40 watts
Weight
3 lbs. (1.3 kg)
Size*
7” h x 4.25” w x 5.5” d
(17.8 h x 10.8 w x 14 d cm)
MLT-1 CENTER CHANNEL
System Frequency Response
130–20,000 Hz ± 2db
Sensitivity
89 dB@2.83 volts/meter
Impedance
8 Ohms Compatible
Crossover Frequency
2200Hz
Tweeter Type
1” (2.54 cm) soft dome
Woofer Type
2 x 3.5” (8.9cm) high rigidity
poly cone with extended throw drive assembly
Enclosure Type
Non-resonance asymmetrical
chamber format, sealed
Power Handling
50 watts
Weight
5 lbs. (2.2 kg)
Size*
4.5” h x 12” w x 5.63” d
(10.8 h x 30.5 w x 14.3 d cm)
MLT-1 SUBWOOFER
System Frequency Response
40–200 Hz ± 3 dB. Anechoic in the LFE mode.
Low Pass Filter Frequencies
50Hz–200Hz
Phase
0°, 180°
Woofer Type
8” (20.3cm) high-excursion, paper cone with
extended throw driver assembly
Enclosure Type
Bass reflex
Amplifier
100 watts RMS (250 watts peak)
Impedance
Left & Right/LFE RCA – 10,000 Ohms
Inputs
Left & Right/LFE RCA Line Level
Mains Power Draw
Standby: 12W
Idle: 12W
Max: 175W
Weight
24.4 lbs. each (11.1 kg)
Size*
14” h x 11” w x 12.5” d
*For detailed dimensional drawings, please see page 15.
Specifications are subject to change without notice.