MartinLogan I5 Speaker User Manual


  Open as PDF
of 16
 
7
speCiFiCations*
Frequency.Response                 
Dispersion.                     
Sensitivity                       
Impedance                      
Crossover.Frequency                
High.Frequency.Driver.                
Low.Frequency.Driver                
Cabinet.                      
Components                    
Recommended.Amp.Power            
Binding.Post.Inputs                  
Weight                        
Dimensions.(HxWxD).              
60–25,000 Hz ± 3 dB
80° x 80°
92 dB @ 2.83 volts/ meter
5 Ohms. Compatible with 4, 6, or 8 Ohm rated
amplifiers.
2,700 Hz
1” x 1.4” (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25” x 1.75” (13.3cm x 4.4cm)
diaphragm.
5.25” (13.3cm) aluminum cone with cast basket.
Non-resonant asymmetrical chamber format. Rigid
structured dust cap to reduce cone break-up modes.
Ported
Custom air core coil and low DCR steel laminate
inductors. Polypropylene film capacitors in series
and low DF electrolytic capacitors in parallel.
Overall system thermal/current protection.
20–200 watts
Custom 5-way binding posts
12 lbs. (5.4 kg)
11.4” x 6.8” x 9.5”
(29cm x 17.3cm x 24cm)
*Specifications are subject to change without notice.
 previous next