MartinLogan FX2 Speaker User Manual


 
5
installation
WARNING! Installation other
than that described in the body
of this document requires specif- ic
documentation from MartinLogan.
BREAK IN
Allow approximately 72 hours of break-in at 90
dB (moderate levels) before any critical listening.
Note:.This speaker is not magnetically shielded
and therefore should not be placed directly beside
or atop a CRT television.
INSTALLING ON A WALL
Note: These instructions assume the mounting
surface is standard wood frame and sheet rock
construction. If you wish to mount to another type
of surface, consult a bonded contractor.
Required.hardware.(included):
(1) Installation template
(1) Wall bracket
(1) Shoulder bolt
(2) Rubber bumpers
Fig. 5A Fig. 5CFig. 5B
Fig. 4