Filter
Top Products
WW22
Arrayable two-way compact trapezoid system
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: info@martin-audio.com
All information is Copyright © 2006 Martin Audio Ltd.
www.martin-audio.com
5 of 5
touring and theatre
architectural and engineering specifications
The loudspeaker system shall be of the two-way
switchable active/passive type consisting of one 12"
(300mm) direct radiating reflex loaded low frequency
transducer and one 1" (25mm) exit HF compression
driver mounted on a constant directivity horn in a
trapezoidal plywood enclosure. The enclosure shall be
fitted with an integral pole mounting socket and
threaded inserts for wall and ceiling mounting. Active or
passive operation shall be selected by a switch at the
rear of the enclosure. In active mode the loudspeaker
shall be bi-amped and operated with a separate
electronic controller. In passive mode, low and high
frequency sections shall be integrated by an internal
1.5kHz passive crossover network.
Performance of the loudspeaker system with its
electronic controller shall meet or exceed the following
criteria:
Frequency response measured 1 metre on axis shall be
60Hz-18kHz ±3dB.
High frequency dispersion at -6dB points shall be
70˚H x 40˚V.
Power handling shall be 300W AES, 1200W peak
(LF/HF), 60W AES, 240W peak HF
Rated impedance shall be 8 ohms LF/(LF+HF),
8 ohms HF.
Maximum SPL measured at 1 metre on axis shall be
122dB continuous, 128dB peak.
Dimensions (W) 365mm x (H) 554mm x (D) 364mm
(14.4ins x 21.8ins x 14.3ins).
Weight 24kg (53lbs).
The loudspeaker system shall be the Martin Audio W2.
NN oo tteess
(1) Measured on-axis in half space at 2 metres, then referred to 1 metre.
(2) AES Standard ANSI S4.26-1984.
(3) Measured in half space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(4) Measured in half space at 2 metres using band limited pink noise, then referred to 1 metre.
(5) Measured on-axis in open (4π) space at 2 metres, then referred to 1 metre.
(6) Measured in open (4π) space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(7) Measured in open (4π) space at 2 metres using band limited pink noise, then referred to 1 metre.
TTrraaddee DDeessccrriippttiioonnss AAcctt
Due to Martin Audio’s policy of continuing improvement, we reserve the right to alter these specifications without prior notice.
Martin Audio is committed to refining state of the art sound reinforcement, combining in-depth product and field applications
research with advanced manufacturing techniques. Every Martin Audio product is built to the highest manufacturing standards
and rigorously tested to ensure that it meets the performance criteria specified in the design.
accessories
HTKEM03A Flying yoke
HTKCT05 8mm Shouldered eye bolt
GPT060 Fitted enclosure flying points
HTKLIS Lightweight install stud
technical specifications
TYPE Compact two-way trapezoid, switchable
active/passive
FREQUENCY RESPONSE (5) 60Hz-18kHz ± 3dB
-10dB @ 50Hz
DRIVERS 12" (300mm) / 3" (75mm) voice coil
1" (25mm) exit HF compression driver
RATED POWER (2) LF/(LF + HF): 300W AES, 1200W peak
HF: 60W AES, 240W peak
RECOMMENDED AMPLIFIER 400-550W into 4 ohms
SENSITIVITY (6) LF/(LF + HF): 98dB
HF: 106dB
MAXIMUM SPL (7) 122dB continuous, 128dB peak
NOMINAL IMPEDANCE LF/(LF + HF) 8 ohms
HF: 8 ohms
DISPERSION (-6dB) 70º horizontal, 40º vertical
CROSSOVER 1.5kHz active/passive
FINISH Textured grey paint
PROTECTIVE GRILLE Grey perforated steel
CONNECTORS 2 x Neutrik NL4
FITTINGS 8 x M8
1 x mounting pole socket
2 x MAN blanking plates
2 x rear kelp fittings
DIMENSIONS (W) 365mm x (H) 554mm x (D) 364mm
(W) 14.4ins x (H) 21.8ins x (D) 14.3ins
WEIGHT 24kg (53lbs)