Filter
Top Products
In all cases, set the main (W8L, W8LC or W8LM) and sub-woofer controller output parameters as follows,
making sure that controller inputs are initially set flat (no equalisation), 0dB gain, 0ms delay.
Flown WLXs
Side-by-side arrays
Similar length (height) sub-woofer arrays should be placed beside the main system for consistent
performance and maximum impact throughout the audience area. ViewPoint™ should be used to design
matching arrays using the Match WLX function . . .
10 x W8LC 7 x WLX
Typical 10 x W8LC + 7 x WLX side-by-side arrays for high power music applications
Mixed arrays
Sub-woofers may be flown above smaller main systems using W8L Series flying systems or adaptors.
ViewPoint™ should be used to ensure system safety . . .
4 x WLX + 8 x W8LC mixed array for orchestral applications
All material © 2007. Martin Audio Ltd. Subject to change without notice.