Filter
Top Products
N
º
433Triple-Mono Power Amplifier
Rated power output: 200 W/ch rms power @ 8 Ω
400 W/ch rms power @ 4 Ω
all above power ratings from 20 Hz–20 kHz at <0.5% THD
(assuming that the AC mains can deliver adequate current, without its own voltage sagging)
Frequency response: within 0.2 dB from 20 Hz to 20 kHz
Signal-to-noise ratio: better than –80 dB (ref. 2.83 V)
Voltage gain: 26.8 dB
Input impedance: 100 kΩ (balanced)
50 kΩ (unbalanced)
Input sensitivity 2.83 V output: 130 mV
Full output: 1.82 V
Power consumption: 200 W in on, 100 W in standby, 10 W in sleep
Mains voltage: Determined by the needs of the country for which the unit was manufactured;
cannot be reset by dealer or user
Connector complement: (6) custom binding posts
(3) 3-pin XLR balanced input connectors
(3) RCA input connectors
(2) 1/8-inch mini-jacks for remote turn-on
(1) RS-232 port on RJ-11
(2) Mark Levinson communications ports on RJ-11, RJ-45
(1) IEC-standard AC receptacle
Output impedance: less than 0.05 Ω from 20-20,000 Hz
Overall dimensions: width: 17.75" (45.1 cm)
height: 7.65" (19.4 cm)
depth 19.83" (50.4 cm)
Shipping weight: 130.5 lb (59.2 kg)
Net weight: 114.5 lb (51.9 kg)
Specifications are subject to change without notice.
Nº433 capacitors
N
º433
channel assembly