Marantz SR6001 Stereo Receiver User Manual


 
SR6001 RS-232C Control Specification Page: 15 / 19
Document Version [1.00]
Company Restricted
5-3. Status request and Status answer list
5-3-1. Normal Status request and Status (answer and feedback) list
Status request Status answer and feedback
OFF “PWR:1”
POWER “PWR:?”
ON “PWR:2”
OFF “ATT:1”
AUDIO ATT “ATT:?”
ON “ATT:2”
OFF “AMT:1”
AUDIO MUTE “AMT:?”
ON “AMT:2”
OFF “VMT:1”
VIDEO MUTE “VMT:?”
ON “VMT:2”
VOLUME “VOL:?”
Volume value = xxxy
(see command list)
“VOL:xxxy”
(+18.0 ~ -80.0dB)
TONE BASS “TOB:?”
Bass value = xxx
(see command list)
“TOB:xxx”
TONE TREBLE “TOT:?”
Treble value = xxx
(see Command List)
“TOT:xxx”
SOURCE Select “SRC:?”
Video+Audio source
(see Command List)
“SRC:va”
(v ,a= ‘0’ ~ ‘Z’)
(v = video, a = audio.)
OFF “71C:1”
7.1 Channel Input “71C:?”
ON “71C:2”
ANALOG “ISG:1”
DIGITAL “ISG:2”
INPUT SIGNAL “ISG:?”
HDMI “ISG:4”
SPEAKER Select “SPK:?”
Speaker status = ab
a = SPKR-A, b = SPKR-B
“SPK:ab”
a,b (1 = OFF, 2 = ON)
Status request Status answer and feedback
SLEEP “SLP:?” Sleep time (xx = 00 ~ 90) “SLP:xx”
OFF “MNU:1” ( Not on Menu)
MENU “MNU:?”
ON “MNU:2” (On Menu)
Status request Status answer and feedback
DC TRG. “DCT:?”
“DCT:ax”
(a: OFF=1, ON=2)
e.g.)
“DCT:1x”, (TRG.1 OFF)
“DCT:2x”, (TRG.1 ON)
Status request Status answer and feedback
Surr. Mode “SUR:?” “SUR:x”
same as command
replay
(see Command list)
Dolby Headphone
mode
“DHM:?” “DHM:x”
same as command reply
(see Command list)
OFF “NGT:1”
Night Mode “NGT:?”
ON “NGT:2”
Lip Sync. “LIP:?” VALUE (ms)
“LIP:xxx”
(xxx = 000 ~ 200 ms)