Filter
Top Products
ENGLISH
10
PLAYBACK OPERATION
Normal playback
1. Press the POWER switch !0 to turn on the power.
2. Press the desired input selector y according to
the table shown below.
3. Start playing the desired source.
Adjust the volume using the VOLUME control i.
If necessary, adjust the tone using the BASS and
TREBLE controls !3 and !4.
Source component Input selector
CDV-CD player CD
FM or AM broadcasting FM/AM
TV or AUX AUX/TV
Analog player PHONO
Cassette deck TAPE MONI
ADJUSTMENTS
¡¡
¡¡
¡RECORDING WITH A CASSETTE DECK
Recording with TAPE 1
1. Select the program source to be record with the
INPUT FUNCTION SELECTOR buttons y.
2. Start recording on the cassette deck connected to
the TAPE 1 jacks.
3. The volume, balance, bass and treble setting have
no effect on the recording or dubbing.
LISTENING TO FM STEREO
BROADCASTS
¡During FM broadcasts, press the FM MODE button
t to select the auto stereo mode.
¡Each time this button is pressed, the mode changes
as follows.
stereo mode : STEREO indicator lights up.
monaural mode : STEREO indicator goes off.
¡When listening to very weak FM stereo stations, you
may experience higher than normal background
hiss Switch to monaural sound to eliminate the hiss.