Filter
Top Products
20
ENGLISH
1.
When you select “MANUAL” in T-MODE menu
by pressing the
1 or 2
button, this unit will emit
a pink noise from the front left speaker. At this
time, adjust the desired level of the master
volume. Remember the level of this noise and
then press the 4 button. This unit will emit the
pink noise from the center speaker.
2.
Using the 1 and 2 cursor buttons, adjust the
volume level of the noise from the center
speaker so that it is the same level as the front
left speaker (Note that this can be adjusted
to any level between –10 and +10 dB in 1dB
intervals).
+10dB
+9dB
-9dB
Minimum
Maximum
1 dB interval
Reference
1 dB interval
-10dB
(SW -15 dB)
button
button
0dB
3.
Press the
4
cursor button again. This unit will
now emit the pink noise from the front right
speaker.
4.
Repeat steps 2 and 3 above for the front right
and other speakers until all speakers are
adjusted to the same volume level.
5.
Press the ENTER button, you can stop the test
tone mode.
Or press the
1 or 2
cursor button to
select “EXIT” then press the ENTER button to
exit the SETUP MENU.
Or press the
1 or 2
button to select “RETURN”
then press the ENTER button to return the
previous “2-2.
Speakers Distance
” setup.
Notes:
• Speakers that you selected “None” for in the Speaker
Size Setup menu will not appear.
• The setup level for each channel is memorized for
reproduction in all surround mode by this method
exclude CS mode, Multi channel stereo mode and
7.1 ch input mode.
• To adjust the speaker levels for 7.1-channel input
sources, you will need to use the 7.1CH Level Input
setup menu.
2-3. SPEAKERS LEVEL SETTING WITH TEST TONE
Here you will set the volume for each speaker so that
they are all heard by the listener at the same level.
Moreover, if the T.TONE button is pressed, unit can
enter into this menu directly.
Note:
The speaker level settings are not available in 7.1
Channel Input mode, CS mode and Multi Channel
Stereo mode.
T(TEST) MODE :
Selects “MANUAL” or “AUTO” for generating mode
of test tone 1 or 2 cursor button.
If you select “AUTO” by pressing the 4 button, the
test tone will be cycled through in a circular pattern
which is L (Left) → C (Center) → R (Right) → SR
(Surround Right) → SBR (Surround Back Right) →
SBL (Surround Back Left) → SL (Surround Left) →
SW (Subwoofer) → L →.. increments of 2 seconds
for each channel.
Using the 1 and 2 cursor buttons, adjust the volume
level of the noise from the speaker so that it is the
same level for all speaker.
Press the ENTER button, you can stop the test tone
mode. Or press the 1 or 2 cursor button to select
“EXIT” then press the ENTER button to exit the
SETUP MENU.
Or press the 1 or 2 cursor button to select “RETURN”
then press the ENTER button to return the previous
“2-2. Speakers Distance” setup.
If you select “MANUAL”, adjust the output level of each
speaker as follow.
SURROUND
AV SURROUND RECEIVER SR3001
INPUT SELECTOR
PHONES
STANDBY
7.1CH INPUT
PURE
SETUP
DIRECT
SIMPLE
AUTO
HT-EQ
MENU
ENTER
DISPLAY
MEMORY
CLEAR
T-MODE
EXIT
BAND
MODE
DISP MULTI AUTO TUNED STV
–
OFF NIGHTPEAK ANALOG
DIGITAL
ATT
SLEEP
SURR
AUTO
DIRECT DISC 6.1MTX 6.1 EQ
DIGITAL
SURROUND
AAC
PCM
L
C
R
SL S SR
LFE
POWER ON/OFF
S. SPEAKER B
1.
5. 5.1.
2.
5.1.
3.
5.
1.
5.
5.
2.
5.
1.
3.
5.
NIGHT
CSII EX/ES VIRTUAL
DTS
PURE DIRECT
AUTO
321
654
T.TONE
MENU OFF
SET UP/
MENU
OSD
VOL.
TV
VOL.
MAIN
SLEEP
MUTE
AMP
ENTER
AUX1
MAIN
2-4.
SPEAKERS LEVEL SETTING WITHOUT TEST TONE
Channel level (speaker level) can be adjusted
without using test tone.
Note:
Four channel level settings can be memorized for
reproduction: the 7.1 ch input mode, CS mode, Multi
channel stereo mode, and all other surround modes,
respectively.
1.
Set the surround mode or 7.1 ch input mode
which you want to adjust the channel level.
2.
Press the CH.SEL button on the remote.
3.
Select the desired channel (speaker) with the 1
or 2 cursor buttons.
4.
Adjust the level with the 3 or 4 cursor buttons.
5.
After completing the setup, press the CH.SEL
button again.
MENU STRUCTURE of Speaker Level setup
MANU AUTO
SW
L C
SBR
R
SL SR
EXITRETURNTO MAIN MENU
SBL
Speaker
(Auto)
Speakers
Distance setup
MAIN
MENU
exit SETUP
MENU
Test Tone mode
Speakers
Level setup
Speakers
Distance
setup
Direct selec
by remote
control
Listening
Positiom