Filter
Top Products
6
ENGLISH FRANÇAIS
q Power Switch (POWER)
Press once to turn the power to deck on, and once more to turn
the power off.
The deck remains in a standby (non-operative) mode for
approximately 2 seconds after it is switched on.
w Eject Button ( EJECT)
Press this button to open the cassette compornent cover, When
the tape is running, press the STOP ( ) button first to stop
tape transport, then press the Eject button.
e Counter Reset Button (COUNTER RESET)
Press this button to reset the tape counter to zero.
i Rec Level Control (REC LEVEL)
This knob adjusts the recording input level. It affects the level in
both channels. See page 9.
o Cassette Compartment Cover
If the cover is not closed completely, the tape transport buttons
will remain inoperative.
!0 Headphone Jack (PHONES)
For private music enjoyment without disturbing others, or for
monitoring a recording, a headphone set may be connected to
this jack. Use a headphone with an impedance rating of 8 to
1200 ohms.
NAMES AND FUNCTIONS OF PARTS
RESET
MIN
–
PHONES
CONTROL
PITCH
PLAY
+
RESET
COUNTERCOUNTER
REC/PLAY
EJECT
A
PLAY
PLAY
HIGH
PAUSE
NORMAL
REC MUTERECORD
REC LEVEL
SYNC REV
STOP
POWER
ON/OFF
STOP
CCONT. PLAY
B
OFF
PLAY
OFF
REC
C
B
REV. MODE
DOLBY NR
DOUBLE CASSETTE DECK SD4050
EJECT
TIMER
MAX
DUBBING SPEED
AUTO TAPE SELECT/HIGH SPEED DUBBING
AUTO REVERSE
AUTO TAPE SELECT/HIGH SPEED DUBBING
AUTO REVERSE
r!5 o!2 ey eu!3!1 o
qtwiuw!0!4
u Tape Transport Buttons
Rec Pause Button
(
PAUSE
)
(Deck B only)
Press this button to enter the recording pause mode from the recording or recording mute mode. This
button can only be used during recording.
See page 10.
Pressing this button in the Recording Pause mode will start Auto Rec Mute, and a 4-second silent space is
recorded onto the tape. See page 10.
Rec Mute Button
REC MUTE
(Deck B only)
(
REC
)
(Deck B only)
(FF)
(PLAY)
(STOP)
(REW)
Forward Play Button
Stop Button
Fast Rewind Button
Fast Forward Button
Rec Button
Press to Forward playback tape.
(PLAY)
Reverse Play Button Press to Reverse playback tape.
Press to stop the tape in any mode.
Press for fast rewind.
Press for fast forwarding
Press the REC button and PLAY button simultaneously to start recording. If only the REC button is pressed,
the deck enters the Recording Pause mode.
r Dolby NR Switch (DOLBY NR)
To record or playback tapes with Dolby B or C-type noise
reduction, set this switch to “B” or “C” . Turn it “OFF” when not
using the Dolby NR system.
t Reverse Mode Switch (REV MODE)
Select the tape of tape transport. The reverse mode can be set
to (one side), (both side), (continuous
playback).
y Dubbing Speed Buttons (DUBBING SPEED)
Pressing the NORMAL button starts regular speed dubbing
from deck A to deck B. Press the HIGH button to perform
dubbing at double speed. See page 10.
!1 Remote Sensor
Each of “PLAY, FF, REW, STOP, REC, REC PAUSE, REC MUTE,
DIRECTION, COUNTER RESET, DECK A and DECK B”
functions can be remote controlled with wireless handset.
NOTE:
Note that only the A deck can be operated with remote control
units which have no A/B selector button.
!2 Syncro Reverse (SYNC REV)
Press this button to set the SYNC REV mode. See page 11.