Filter
Top Products
ENGLISH
14
To Check Programmed Tracks
Press
SCROLL/RECALL
button while programming or
program play (when “PROG” indicator is flashing or lights).
Programmed tracks will be displayed in programmed order.
To Delete a Programmed Track
q Press
SCROLL/RECALL
button in stop mode when
program has been made (when “PROG” indicator lights
or flashes). Programmed tracks will be displayed in
programmed order.
w When the track you want to delete appears on the display,
press
CANCEL
button at once. The deleted track’s track
number indicator will disappear.
To Clear Whole Program
Press
STOP
button two times while in program play. In
stop mode, press
STOP
or
CANCEL
button once.
Program can also be cleared by pressing
OPEN/CLOSE
key to open the disc tray.
To Add Tracks to Program
Press
PROG
button when program is remaining (“PROG”
indicator is constantly on) and in stop mode. “PROG” indicator
will flash and tracks can be add to the end of program.
* Please be careful about the following matters.
• When programming 1st to 9th tracks in a disc that has over
10 tracks by using numeric buttons,. For instance,
programming the 3rd track after programming the 1st track,
press
3
button more than approximately 1.5 seconds
after
1
button is pressed.
• Likewise, when programming a track at 10th or after. For
example, to program 13th track, press
3
button within
approximately 1.5 seconds after
1
button is pressed.
• When programming a track in a disc that has less than 9
tracks. For instance, to program the 5th track after 4th track
has been programmed, press
5
button more than
approximately 0.5 second after
4
button is pressed.
• When programming with
, and buttons, press
the buttons repeatedly until the track you want appears.
And the gap has to be less than 0.5 second.
AMS Play
If
AMS
button is pressed in stop mode or in playback mode,
PLAY “3” indicator will flash and the beginnings of all the
tracks will be played for 10 seconds each starting from the
first track. This feature is convenient to search where your
favorite track is.
When you have found the favorite track, press
AMS
button
again. PLAY indicator will light constantly and normal playback
will begin from the current track.
* If
AMS
button is pressed after tracks have been
programmed, only the selected tracks will be played with
AMS.
Q&A
• How many tracks can be programmed?
Up to 30 tracks can be programmed for program
play.
• Can I listen to program play repeatedly?
Press
REPEAT
button once. “RPT” indicator will
light and program play will be repeated.
• Can I shuffle the programmed track order?
Press
RANDOM
button during program play or in
stop mode.
12
TRK
34 56 78 9101112131415
Blinks