Filter
Top Products
8
ENGLISH
RC4001PM REMOTE CONTROLLER
Using this remote controller, you can control the PM7001 and
Marantz CD players, DVD players, tuners, tape decks etc. that
have a remote control receptor. The operations possible by
remote controller may differ with each component; therefore
see the instruction manual that came with the component. (See
page 13)
The RC4001PM remote controller buttons are laid out as shown
below.
z Power ON/OFF buttons
• MAIN POWER ON button
This button switches the power ON when the PM7001 is
in STANDBY mode.
• MAIN POWER OFF button
This button switches the PM7001 to STANDBY mode
when the power is ON.
• SOURCE POWER button
This button switches between power ON and STANDBY
modes for Marantz products that have a standby function.
By pressing this button after one of the buttons in the
button group x, you can switch the power between ON
and STANDBY modes for the Marantz product that
corresponds to that button.
By pressing this button after the AMP button x, you can
switch the PM7001 between power ON and STANDBY
modes.
x Input selector buttons
This group of buttons is used for selecting the input source.
Caution
In the PM7001, AUX and DVD, and RECORDER 2’s TAPE
and MD each share the same input jacks. The signal
codes for controlling these Marantz products using the
RC4001PM differ, therefore separate buttons have been
built into the remote controller.
c VOLUME adjustment buttons
• MUTE Button
This button activates the mute function. Pressing this
button again releases the MUTE function.
The MUTE function can also be released by pressing
either the VOLUME 3 or 4 buttons c.
• VOLUME 3 Button
This button increases the volume level.
• VOLUME 4 Button
This button decreases the volume level.
v Component operating buttons
These buttons are for performing basic operations of a
Marantz CD player, DVD player, etc. The function of each
button changes to match the component selected as the
input source using the input selector buttons x.
NAMES AND FUNCTIONS OF PARTS
z
x
v
c