Filter
Top Products
•You can program up to 99 tracks to play in any desired
sequence.
•Tracks can be programmed more than once, but each time
counts as a track. (
SSTTEEPP
)
•A program for playback can be made from both the disc in
the recorder deck and the disc in the player deck. A program
for recording can only be made from the disc in the player
deck.
Programming for playback
11
Select Changer mode or DJ mode using the DJ MODE key.
➜ CHANGER or DJ MODE appears on the display.
22
Press CDR or CD to select the required deck.
➜ Selected key lights up.
33
Press PROG(ram) to enter Program mode.
➜
PPRROOGG
flashes and PROGRAM followed by track
information appears on the display.
44
Select the required track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Key in a track number with the number keys on the remote
control and press ENTER to confirm. For 2-digit numbers,
press the keys in rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number of
programmed tracks (
SSTTEEPP
) are displayed.
55
Repeat step
44
for all tracks to be programmed.
66
Press STOP or PROG(ram) to end programming.
➜
PPRROOGG
lights continuously.
77
Press PLAY/PAUSE 2; to start programmed play.
Programming for recording
11
Press REC TYPE to select the required recording mode (see
‘Recording’).
22
Compile your programme as described in “programming for
playback”. (steps 3 to 5)
•Only tracks from the disc in the CD player can be stored.
33
Press REC(ord). to start recording.
Note:
- To review the program, press PROG(ram), followed by
5
or
6
with the CD player or CD recorder in stop mode.
- To add more tracks to the program, repeat steps
11
to
77
.
- If you try to store more than 99 tracks,
PROG FULL
appears on the display.
Clearing a program
11
Press STOP 9 if necessary to stop programmed play.
22
Press STOP 9 again to clear the program.
➜
PPRROOGG
disappears from the display.
•The program is also cleared if you open the disc tray.
Erasing a track from a program
11
In Stop mode press PROG(ram) to enter Program mode.
22
Use 5 or 6 to select the track that has to be deleted.
➜ The track number and program step will be shown on
the display.
33
Press CANCEL/DELETE to erase the track from the program.
➜ The remaining program steps and the remaining playing
time of the program will be displayed.
4 Repeat step 2 and 3 for all tracks to be erased.
5 Press STOP 9 or PROG(ram) to end erasing.
➜
PPRROOGG
lights continuosly.
REM
TRACK
REC
TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC MANUAL
RECORD
REMTOTAL
ALL
TRACK
TIME STEPTRACK
CD
RW
278
11
REM
TRACK
REC
TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC MANUAL
RECORD
REMTOTAL
ALL
TRACK
TIME STEPTRACK
CD
RW
1
REM
TRACK
REC
TIME
DIGITAL
OPTICAL
ANALOG
PROG
SHUFFLE
REPEAT
SCAN
I
I
CD
RW
CHANGER
SYNC MANUAL
RECORD
REMTOTAL
ALL
TRACK
TIME STEPTRACK
CD
RW
123456789
10 11
Remarks about programming
PROGRAMMING
English
26