Filter
Top Products
1. INTRODUCTION / GENERAL DESCRIPTION
Congratulations on your purchase of the Magneplanar® CC3 Center Channel
Loudspeaker. The Magneplanar CC3 was conceived and designed for perfectionists.
The CC3 consists of a curved, two-way planar magnetic driver. Due to the elegant
simplicity and ruggedness of the design, the Magneplanar CC3 Center Channel will
give many years of trouble-free service.
2. CARTON CONTENTS
1 - CC3 Center Channel Loudspeaker
1 - 1 Ohm Resistor
1 - 4 Amp Normal Blow Fuse
1 - Hex Wrench
1 - Speaker Logo
1 - Owner's Manual
3. PACKAGING
Save all packaging. If you ever need to ship the CC3 it can be shipped safely only in
the original packaging. Should you discard it, packaging is available from Magnepan.
4. HOOKUP
The CC3 employs a unique, high-current connector. To install speaker cable, simply
strip approximately ¼-inch of insulation from the speaker cable end, insert the cable
tighten the set screw. Cables terminated with banana plugs or pins may also be used.
For cables terminated with spade lugs, spade lug adapters are available from your
Magneplanar dealer.
Proper phasing is critical in obtaining good performance from your home
theater system. Double check all of your connections to be certain the left, right, and
center speakers are all connected in phase. The left, right, and center speakers are
usually placed equal distance to the listener for correct time alignment.
5. INSTALLATION AND PLACEMENT