Filter
Top Products
Using the Program Feature:
If you desire to have the song selection of the disc played in a
different order than arranged on the disc, repeat the following
procedures to program the playing order.
1. Press the program button (10). PGM
00 will appear in the display.
2.Use the skip up/down buttons (8/9)
to select the first song to play. Press
the program button to lock the
selection.
3.Repeat step #2 as many times as
needed to determine the playing
order. You can program up to 21
selections.
4.After programming is completed,
press the play button (6) to initiate
the program.
5
CONTROLS AND FUNCTIONS
Note 1: After the program sequence has completed, pressing
the play button will start the play program again.
Note 2: Pressing the stop button (7) will stop the program. To
re-start the program, press the program button (10) and then
press the play button (6).
Note 3: Opening the compact disc door by pressing the open
button (5) this will clear the play selection programming.
☛
☛
Using the Random Feature:
The random feature allows the disc player to select the disc
tracks in an uncontrolled random play order. To initiate the
random play feature, press the random button (17) before
pressing the play button (6). When the play button is pressed,
a moving random indicator will appear in the display area while
the computer is searching for a track selection. When a song
has finished playing, the moving random indicator will appear
in the display again until the selection is made.
☛
Using the Intro Feature:
The intro feature allows the disc player to play the beginning of
each track for 10 seconds and then move on to the next track.
This allows the unit to preview each song quickly or to find a
selection where the title may be unknown but the melody is
familiar.
1. Press the intro button (18) INTRO will
appear in the display
2. Press the play button (6) to start
playing the first song.
Note: When you find the song you want
to listen to, press the intro button once
again to turn off the intro feature (intro is
off when INTRO is not being displayed.
☛
Moving Random Indicator
LS7500CD 08/03/00 2:49 PM Page 5