Macrom 42.17 Stereo Amplifier User Manual


 
MACROM INGLESE 42.15 - 42.17 17 FEBBRAIO 199312
TECHNICAL DATA
42.15 STEREO Power Output
Maximum power .......................................................................70Wx2
Nominal RMS 4 Ohm, 1 kHz at 1% THD.................................. 45Wx2
Nominal RMS 4 Ohm, 20 Hz to 20 kHz at 0,05% THD ............ 35Wx2
BRIDGED Power Output
Maximum power, 4 Ohm, 1 kHz ............................................... 150W
42.17 STEREO Power Output
Maximum power .......................................................................100Wx2
Nominal RMS 4 Ohm, 1 kHz at 1% THD.................................. 65Wx2
Nominal RMS 4 Ohm, 20 Hz to 20 kHz at 0,05% THD ............ 50Wx2
BRIDGED Power Output
Maximum power, 4 Ohm, 1 kHz ............................................... 200W
Frequency response +0, -1dB .................................................. 10-50,000 Hz
S/N (signal to noise ratio) INFA-weighted ................................ 105 dB
Input sensitivity/Impedance
(for nominal power output)
Control in mid position........................................................ 500 mV/10k Ohm
Variable control ..................................................................100-2,000mV/10k Ohm
Speaker impedance.................................................................. 4 or 2 Ohm (stereo)
4 Ohm (bridged, mono)
Power supply (negative ground) 14.0V DC (11-16 V permissible)
Net Weight
42.15...................................................................................1.3 kg
42.17...................................................................................1.5 kg
Chassis size
42.15...................................................................................150(L)x50(H)x217(P) mm
42.17...................................................................................180(L)x50(H)x217(P) mm
Due to continuing improvement, the features and the design are subject to change without notice.
12