Filter
Top Products
10
TECHNICAL DATA
Power IHF 202 500W
RMS Power at (12.5 Volts DC)
at 1 kHz < 0.08 % THD+N at 4 Ohm 2 x 100W
at 1 kHz < 0.5 % THD+N at 2 Ohm 2 x 200W
at 1 kHz < 0.5 % THD+N Mono at 4 Ohm 1 x 400W
Pre-Out Sensitivity 2V
High pass control, (30-600) Hz
Low pass control, (30-600) Hz
Crossover slope 12 dB/Octave
Response in frequency +/- 1 dB 10 - 50.000 Hz
Total harmonic distortion 0.08%
Weighted IHF ASignal-Noise Ratio > 100 dB
Input sensitivity - Impedance 200-4000 mV/22 kOhm
Loudspeaker impedances
Stereo min. 2 Ohms
Mono min. 4 Ohms
Power supply 14.4 V DC(11 - 16 V permissible)
Weight 4,7 kgrs
Dimensions 212(L) x 67(A) x 405(P) mm
Due to the continual incorporation of improvements in this product, the characteristics and
design may be subject to variation without prior notice.
O/M ST 2.100x 25/06/02 18:23 Page 10