Mackie SWA2801z Speaker User Manual


 
10
SWA2801z SPECIFICATIONS
Dimensions
39.19 in/
995.3 mm
34.00 in/
863.6 mm
37.00 in/
939.8 mm
24.62 in/
625.3 mm
FIXED
SWIVEL
System Specifications
Freq range (–3 dB) 43 Hz – 120 Hz
Freq range (–10 dB) 33 Hz – 200 Hz
Maximum SPL @ 1m 130 dB
Peak Output SPL @ 1m 136 dB
Crossover frequency 120 Hz
Input type Balanced differential
Input protection Level protected
Thermal protection Input stage muting,
auto-reset
Input/Output
Input: Stereo bal/unbal.
female XLR
Input Impedance: 50 k
Ω
Loop Through: Stereo bal/unbal.
male XLR
High-Pass Output: Stereo bal/unbal.
male XLR
Level Control: Rotating knob, center
detent, off to +15 dB)
Phase Control: (0– 180 degrees)
Recessed Sliding Switch
Transducer Specifications
Diameter 18” (457 mm)
Voice coil diameter 4” (102 mm)
Power Amplifier
Rated Power 800 watts continuous
1000 watts peak
Rated THD < 0.03%
Cooling Passive
Line Input Power
US Model 120 VAC, 60 Hz
Recommended Amperage Service: 15A
European Model 230 VAC, 50 Hz
Recommended Amperage Service: 8A
Physical Properties
Height 37.00 in/939.8 mm
Width 24.62 in/625.3 mm
Depth 34.00 in/863.8 mm
Weight 154 lb/70 kg
Enclosure 15 mm thick multi-
layer Baltic birch wood
Mounting Methods Floor mount only
WARNING: The cabinet has no rigging points
and is not suitable for rigging. NEVER attempt
to suspend the SWA2801z by its handles.
Disclaimer
Since we are always striving to make our
products better by incorporating new and
improved materials, components, and manufac-
turing methods, we reserve the right to change
these specifications at any time without notice.
“Mackie” and the “Running Man” figure are
registered trademarks of LOUD Technologies Inc.
All other brand names mentioned are trade-
marks or registered trademarks of their respective
holders, and are hereby acknowledged.
©2006-2008 LOUD Technologies Inc.
All Rights Reserved.