Mackie M1200 Stereo Amplifier User Manual


 
MACKIE DESIGNS INC.
16220 Wood-Red Road NE
• Woodinville, WA 98072 USA
Toll-Free 800/258-6883 • FAX 425/487-4337
Outside the U.S., Phone 425/487-4333 • FAX 425/485-1152
®
4
4
Mackie Designs Inc. is engaged in a continuous program
of product evaluation and improvement and reserves the
right to change product specifications at any time
without notice.
The following are trademarks or registered trademarks of
Mackie Designs Inc.: “Mackie.”, the Running Man, and FR
Series.
Speakon is a registered trademark of Neutrik.
Part No. 091-097-00 Rev. B 2/98.
©
1997-1998 Mackie Designs Inc. All Rig/hts Reserved.
CMRR:
> 40dB, 20Hz to 20kHz
Transient Recovery:
< 1µs for 20dB overdrive
@ 1kHz
High Frequency Overload
and Latching:
No latch up at any frequency
or level
Variable Low-Cut Filter:
10Hz (Off) to 170Hz,
2nd Order Bessel
Subwoofer Low-Pass
Filter:
Switched: 63Hz/125Hz,
3rd Order Bessel
Constant Directivity High
Frequency Boost:
2kHz to 6kHz (+3dB points)
6dB/octave high-frequency
shelving filter, (shelving occurs
at approximately 30kHz)
Turn On Delay:
3 seconds
Limiter Section:
Complementary Positive
and Negative Peak Detecting
Indicators:
Six meter LEDs per channel
SIG (Signal Present),
–20, –9, –6, –3, OL (Overload)
CH 1 & 2
PROTECT LEDs
SHORT LEDs
TEMP STATUS
COLD, HOT LEDs
TM
Power Consumption:
M•1200 120V 240V
65 watts at idle 0.9A 0.5A
500 watts with musical
program fully loaded
(4 per side, or 8 bridged)
6.4A 3.2A
850 watts with musical
program fully loaded
(2 per side, or 4 bridged)
10.0A 5.0A
800 watts at full power
into 8 (cont. sine wave)
9.3A 4.7A
1400 watts at full power
into 4 (cont. sine wave)
15.0A 7.5A
2400 watts at full power
into 2 (cont. sine wave)
24.3A 12.2A
M•1400 120V 240V
65 watts at idle 0.9A 0.5A
550 watts with musical
program fully loaded
(4 per side, or 8 bridged)
6.7A 3.4A
900 watts with musical
program fully loaded
(2 per side, or 4 bridged)
10.5A 5.3A
850 watts at full power
into 8 (cont. sine wave)
9.6A 4.8A
1500 watts at full power
into 4 (cont. sine wave)
15.6A 7.8A
2500 watts at full power
into 2 (cont. sine wave)
24.8A 12.4A
AC Line Power:
US 120VAC, 60Hz
Europe 240VAC, 50/60Hz
Japan 100VAC, 50/60Hz
Korea 220VAC, 60Hz
AC Drop-out Voltage:
At approximately 50% of
rated line voltage
Physical:
Height: 2U = 3.5" (89mm)
Width: 19.0" (483mm)
Depth: 15.25" (387mm)
Handle Depth: 1.25" (32mm)
Overall Depth:16.25"(413mm)
Weight: 36 lbs (16.3kg)
15. DESIGNATION.
The power amplifier
shall be a Mackie Designs
(M•1200, M•1400).
®