Filter
Top Products
27
Line Out Level
This adjusts the overall output level in steps of -0.1 db, it can be attenuated to –40 dB in total.
Routing
Routing
In Routing it is possible to apply different settings to the Main and Line outputs:
Symbol Name Main output Line Output
R
L
Highpass fi lter
XX
R
L
Lowpass fi lter
XX
RL
LR
Left and Right channel switching
X
-
M
Mono
-
X
M
Mono lowpass fi lter
-
X
A highpass and a lowpass fi lter can be applied to the Main and Line outputs when you want to connect
an additional amplifi er or subwoofer along with your main amplifi er.
A Mono setting is also available for the Line output, this is used when connecting a single subwoofer to
the Line output.
If no fi lter is selected the full frequency range will be directed to the Main and Line Out terminals. If a
fi lter is selected the frequencies above or below the selected crossover frequency will be directed to the
analog Main or Line Out terminals.
When a highpass or lowpass fi lter has been chosen, the Crossover Frequency and Filter Type menus are
enabled.
Line Out Level