Lyngdorf Audio DPA-1 Stereo Amplifier User Manual


 
7
Front Panel
Controls
The buttons/controls on the front panel of the DPA-1 can all be operated either with direct presses or by
operating the corresponding keys on the supplied remote control. All the keys on the front panel (except
the Mains Switch) are duplicated onto the remote control as well.
1. Mains Switch
Powers the DPA-1 on/off.
2. Mute
Toggles Mute mode on/off.
Pressing the Mute button for 3 seconds will set the DPA-1 in stand-by mode.
3. Analog Input Selector
Changes to Analog input, or if already selected, cycles to the next Analog input.
In standby mode, press to turn On the DPA-1 with the last selected analog input.
4. Digital Input Selector
Changes to Digital input, or if already selected, cycles to the next Digital input.
In standby mode, press to turn On the DPA-1 with the last selected digital input.
5. Display
Display with all information on the menu system, status, active input selection and volume control.
6. Volume Wheel
Optical encoded volume control wheel.
7. Navigation Keys
In stand by mode, press Enter to turn On the DPA-1 with the last selected input.
In normal operation mode the Up/Down toggles between bypass and the available Focus and Global
lters. The Left/Right keys toggles between neutral and the available voicings.
In menu mode the keys are used for navigation in the menu system: Up/Down, Left/Right & Enter. Press-
ing and holding down the Up/Down, Right/Left keys, changes selected values fast.
8. Menu Button
Toggles Menu mode on/off
12 34 5 6 7 8
MENU
ENTER
ANALOG
DIGITAL
DPA-1 Digital Pre-Amplifier
MUTE