Filter
Top Products
UE 900 UE 900
English 54 English
Setup
1
Choose ear cushion size for comfortable fit and
good sound. Go to www.logitech.com/support/
ue900 for more information about choosing
ear cushions.
2
Attach ear cushions to earphones. Push cushion
past rib for secure fit.
3
Connect earphones to a device with 3.5 mm
headphone jack.
For air travel, use Airline adapter to reduce volume
spikes caused by in-flight announcements.
For devices with a ¼-inch (6.35 mm) input jack,
use the ¼-inch (6.35 mm) adapter.
Comply™
Foam Tips
LMS
LMS
XSXXS
4
Wear the earphones
1. Wrap cable around ear.
2. Insert right earphone (marked “R”) in right ear
and left earphone (marked “L”) in left ear.
3. When using the vi cable with microphone,
gently pull cable tight to remove slack.
4. When using the audio-only cable, slide cinch up
the back of the head until secure.
Note: Do not remove earphone from ear by pulling
on cable.
Changing cables
1. Hold earphone. Hold cable where it attaches to
earphone.
2. Gently pull cable from earphone.
3. Attach new cable. Cable snaps into place.
Note: Make sure to connect the “R” (right) cable to
the “R” earphone and the “L” (left) cable to the “L”
earphone.