Linn Twin Klimax Stereo Amplifier User Manual


 
5. Operation
This is the easiest bit. The blue light will be dim when power is first applied,then remain dimmed with the
Klimax Twin in standby mode.When a signal is detected the light brightens up as the amplifier is enabled.If
the amplifier needs to protect itself it will shut down entirely for a few seconds and dim the light.There is no
half way current limiting;the amplifier can either do what is required of it or it will shut down entirely.The
amplifier will revert to standby 10 minutes after the input signal is removed.To operate the Klimax Twin,
select a source on your preamp,wait a couple of seconds for the Klimax Twin to power up,then sit back and
enjoy it.
We wish you many happy years of listening pleasure.
From the Linn Klimax team.
19