Link electronic PDP-886 Stereo Receiver User Manual


  Open as PDF
of 2
 
MODEL PDP-886
CLOSED CAPTION ENCODER, DECODER
SPECIFICATIONS
INPUT:
Number: ................................................................... One (1)
Standard: ..................................................... SMPTE 259M-C 270Mb/s
Connector: .................................................................75Ω BNC
Impedance: ................................................................ 75Ω ±1%
Return Loss: ........................................................ >18dB to 270MHz
Signal Level: ............................................................800mV ±10%
SD SDI OUTPUT:
Number: ................................................................... Two (2)
Standard: ..................................................... SMPTE 259M-C 270Mb/s
Connector: .................................................................75Ω BNC
Impedance: ................................................................ 75Ω ±1%
Return Loss......................................................... >18dB to 270MHz
Signal Level: ............................................................800mV ±10%
SD ANALOG DECODER OUTPUT:
Number: ....................................... Two, SD SD Analog NTSC/PAL Composite
Level:........................................................................1 Vpp
Impedance: ................................................................ 75Ω ±1%
Connector: .................................................................75Ω BNC
Standard: ..................................................... NTSC/PAL COMPOSITE
SNR: ....................................................................... >65dB
Differential Phase:.............................................................. <1.0°
Differential Gain: .............................................................. <1.5%
DATA INPUTS, Common to Both Versions
Number: ........................................................................ 4
RS-232/422: ........................................................Two, 9-pin D Sub
Modem: ............................................................... Two, RJ-11
Protocol: ................................................................. 1200,n,8,1
Baud Rate: ...................................................1200, 2400, 4800, & 9600
FRONT PANEL:
AC Power:..................................................................ON/OFF
By-Pass: ....................................................... Push/Push, Maintained
Test: .......................................................... Push/Push, Momentary
Three Position DIP Switch: .......... Selects Baud rate of 1200, 2400, 4800 or 9600, plus pedestal
LED Indicators: ............................. Video Presence, RS232 Data Presence, Pedestal
Modem LED’s: .................................................RI, OH, CD, Each Modem
LCD Display: ............................................Encoding Mode, Field 1 or Field 2
Decoding Mode: ..................................... CC1, CC2, T1, T2, CC3, CC4, or XDS
Standard: .............................................................. NTSC or PAL
Baud Rate: ................................................... 1200, 2400, 4800 & 9600
ENVIRONMENTAL:
Temperature:....................................................... 0° to 50°C Ambient
Humidity: .................................................. 10% to 90% non-condensing
AC Input: ...................................................... 85 to 265 VAC, 50/60Hz
Power:..................................................................... 36 VAR
MECHANICAL:
Height:...................................................................... 1.750"
Width: .........................................................................19"
Depth: ......................................................................... 12"
LINK ELECTRONICS, INC. 2137 Rust Avenue Cape Girardeau, MO 63703-7668
Phone 573 334 4433
FAX 573 334 9255
 previous