INTRODUCTION
OPERATION NOTES
The Linear High Denition A/V Scaler for HDMI allows you to upscale
and switch your standard denition or high denition Component and
HDMI sources to resolutions up to 1080p. Anything from set-top boxes,
DVD players to the next generation of gaming consoles can be plugged
into the Linear High Denition A/V Scaler for HDMI.
The Linear High Denition A/V Scaler for HDMI supports one Component
source with analog audio, one Composite or S-Video source with analog
audio, and two HDMI sources with digital audio. The analog audio from
the analog sources is digitized and outputted to the HDMI connection as
well as the digital audio outs. The HDMI inputs also have separate digital
audio inputs, so you can use DVI sources and separate digital audio and
the High Denition A/V Scaler for HDMI will embed the digital audio into
the HDMI output as well as the digital audio outs.
How It Works
You simply connect all your components and your display. Easy to use
on-screen menus are accessible through the IR remote control. The
IR remote control allows for effortless setup and image adjustment to
accommodate different viewing modes and screen sizes to perfect your
nal picture.
READ THESE NOTES BEFORE INSTALLING
OR OPERATING THE HIGH DEFINITION A/V SCALER FOR HDMI
When initially powering on HDMI sources, it is important to have the High •
Denition A/V Scaler for HDMI’s output selected to that source to ensure that
the EDID is relayed properly.
Compatible with all HDMI and DVI* displays•
The Scaler to 1080P has a 15-foot limit on how far it can transmit the DDC •
(Display Data Channel) information out of the HDMI output jack to the display.
Connections to displays at distances longer than 15 feet should use a true DDC
re-clocking solution such as our CAT-5 based HDMI signal extender device
(Linear part number HDMI-CAT5-EXT).
HDMI/HDCP compliant•
NOTE: *When used with a DVI to HDMI adapter
1
