Filter
Top Products
3. Connect the speaker wire. BE SURE TO
OBSERVE CORRECT POLARITY!
4. Insert the speaker into the opening in the
ceiling and CAREFULLY tighten each of the four
clamping screws, alternating diagonally between
each screw position to ensure proper fit and finish.
See FIGURE 1.
CAUTION: DO NOT OVER-TIGHTEN THE SCREWS!
If using a drill to tighten the clamping screws, be
sure to set the torque setting very low. Setting
the drill’s torque too high may break the mounting
clamps, the wall surface, and/or the speaker frame
assembly.
5. Replace the speaker grille.
Warranty
Linear LLC warrants this product to be free from defects in material and workmanship for two years (2 years). The time period will be measured using the date
code labeled on the product. Linear LLC is not responsible for damage to the product resulting from the buyer's improper handling, stocking or warehousing of
the product. Any implied warranty arising from the sale of the product including implied warranties of merchantability and fitness for purpose are limited. Linear
LLC shall not be responsible for any losses, damages or expenses, whether direct, consequential, or incidental arising from the use or the inability to use the
product. Some states and countries do not allow limitations on how long an implied warranty lasts or the exclusion or limitation or incidental or consequential
damages, so the above exclusions may not apply. The Linear LLC warranty gives specific legal rights in addition to other rights, which may exist and vary from
state to state and country to country.
The warranty is limited to repair or replacement of products returned, freight prepaid, to Linear LLC, there is NO PROVISION FOR LABOR COST OR OTHER
REIMBURSEMENTS OF ANY KIND.
1. Failures due to product abuse, such as negligence, improper use, and electrical surge including damage from lightening, water damage or other damage
due to natural disasters are not covered by the warranty. The most common form of product abuse is surge damage caused by lightening.
2. The warranty shall also be voided by any tampering with the date code, labels or other markings on the product.
3. Products that are damaged in transit to Linear LLC due to improper packaging or by the carrier (shipping company) will not be covered under the warranty.
If the product was damaged or lost by the carrier, it is the sender's responsibility to create a claim against the carrier.
4. The user is responsible for all labor costs associated with removing, reinstalling and returning the product to Linear LLC.
Linear LLC, at its option, will repair or replace the defective product. Replacements will be made from B-Stock, if an exact replacement is not available, Linear
LLC, at it's option, will select the nearest equivalent product. The user is responsible for freight charges to Linear LLC. Linear LLC will return warranted repaired
or replacements by UPS Ground or an equivalent service. A customer may pay the additional costs for second-day or next-day service.
All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact Linear Technical Services at 1-800-999-5225 for an
RPA# and other important details.
H480-2 SPECIFICATIONS AND DRIVER COMPONENTS
The H480-2 In-Wall/In-Ceiling Loudspeaker line is
constructed using the finest materials available to
provide a lifetime of listening enjoyment.
Tweeter Material PEI
Woofer Cone 6.5" Polypropylene
Woofer Surround Inverted Butyl
Woofer Basket Stamped
Crossover Response 6dB/octave
Crossover Switches None
Interconnect Wire 20AWG
Input Connectors Spring Terminals
Hardware Stainless Steel
Nominal Impedance 8 Ohms
Sensitivity Range 87dB (1W/1 Meter)
Power Handling 5-50W
Cutout Diameter 8-1/16"
Overall Dimensions 9-1/4" dia. x 3-5/8" deep
Figure 1
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,H480-2 - LINEAR P/N: 224104 X2 - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500" X 11.000" - SCALE: 1-1 - SIDE 2 OF 2
Copyright © 2004 Linear LLC 224104 X2