Filter
Top Products
Y
OU
SHOULD
READ
THESE
I
MPORTANT
S
AFETY
I
NSTRUCTIONS
K
EEP
THESE
INSTRUCTIONS
IN
A
SAFE
PLACE
L
INE
6, AX2, F
LOOR
B
OARD
, FB4, T
UBE
T
ONE
ARE
TRADEMARKS
OF
L
INE
6, I
NC
. A
LL
OTHER
TRADEMARKS
PROPERTY
OF
THEIR
RESPECTIVE
OWNERS
.
Before using your AX2, be sure to carefully read the applicable
items of these operating instructions and the safety suggestions.
1. Obey all warnings on the amp and in the
AX2 User Guide.
2. Do not place near heat sources, such as radiators, heat registers, or appliances which produce
heat.
3. Do not block any of the ventilation openings or use in an enclosed space.
4. Guard against objects or liquids entering the enclosure.
5. Connect only to AC power outlets rated 100-120V or 200-240V 47-63Hz (depending on the
voltage range of the unit; refer to the back panel). Current ratings should be a minimum of
5A for the 120V range and 2.5A for the 240V range.
6. Do not step on power cords. Do not place items on top of power cords so that they are
pinched or leaned on. Pay particular attention to the cord at the plug end and the point where
it connects to the amp.
7. Unplug the amp when not in use for extended periods of time.
8. Do not perform service operations beyond those described in the
AX2 User Guide
. In the
following circumstances, repairs should be performed only by qualified service personnel:
•
LIQUID
IS
SPILLED
INTO
THE
UNIT
•
AN
OBJECT
FALLS
INTO
THE
UNIT
•
THE
UNIT
DOES
NOT
OPERATE
NORMALLY
OR
CHANGES
IN
PERFORMANCE
IN
A
SIGNIFICANT
WAY
•
THE
FUSE
IS
BLOWN
•
THE
UNIT
IS
DROPPED
OR
THE
ENCLOSURE
IS
DAMAGED
9. Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage.
Always practice ‘safe listening.’
SERIAL NO:
The serial number can be found on the AX2 back panel near the power switch. Please note it for future reference:
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
CAUTION:
To reduce the risk of fire or electric shock,
do not remove screws. No user-serviceable parts inside. Refer
servicing to qualified service personnel.
The lightning symbol within a triangle means
“electrical caution!” It indicates the presence
of information about operating voltage and
potential risks of electrical shock.
The exclamation point within a
triangle means “caution!” Please
read the information next to all
caution signs.
WARNING:
To reduce the risk of fire or
electric shock, do not expose this appliance to
rain or moisture.