Filter
Top Products
15
Operation
4
Operation
Radio Operations
Be sure that both FM and AM aerials are
connected. (Refer to the page 12)
Listening to the Radio
1. Press FUNCTION until FM or AM (MW)
appears in the display window.
The last received station is tuned in.
2. Press and hold
TUNING (-/+) for about
two seconds until the frequency indication
starts to change, then release. Scanning
stops when the Unit tunes in a station.
or
Press
TUNING (-/+) repeatedly.
3. Adjust the volume by rotating
VOL on the
front panel or by pressing VOL + or - on the
remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM and AM
(MW).
Before tuning, make sure that you have turned
down the volume.
1. Press
FUNCTION until FM or AM (MW)
appears in the display window.
2. Select the desired frequency by pressing
TUNING (-/+)
3. Press
PROGRAM/MEMO. a preset number
will ash in the display window.
4. Press
PRESET · FOLDER (
v
/
V
) to select the
preset number you want.
5. Press
PROGRAM/MEMO.
The station is stored.
6. Repeat steps 2 to 5 to store other stations.
Deleting all the saved Stations
1. Press and hold PROGRAM/MEMO. for two
seconds.
“ERASE ALL” will ash up on the unit display.
2. Press
PROGRAM/MEMO. to erase all saved
radio stations.
Improving poor FM reception
Press PLAY (
B
/
X
) (ST./MO) on the unit or on
the remote control. This will change the tuner
from stereo to mono and usually improve the
reception.
FB164
RAT375-A0U_DPANLLK_ENG_4608.indd15 15 2010-02-25 ¿ÀÀü 10:44:44