Filter
Top Products
[ 89 C2200 User Guide ]
Settings
[ 88 C2200 User Guide ]
Settings
Security settings
Menu-9-5
Various passwords are used to protect certain features of your
phone. Refer to page 24-25 for the various passwords.
PIN code request
(Menu-9-5-1)
When the PIN code request feature is enabled, you must enter
your PIN each time you switch the phone on. Consequently, any
person who does not have your PIN cannot use your phone without
your approval.
The following options are available:
• On: You must enter the PIN each time the phone is switched on.
• Off: The phone connects directly to the network when you switch
it on.
Phone lock
(Menu-9-5-2)
When the Phone lock feature is enabled, the phone is locked and
you must enter the phone password each time the phone is
switched on.
The password is factory set to 0000. To change the phone
password, refer to the Change codes–Security code menu option
(Menu-9-5-5-1). Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
1 Power on
] On: You are required to enter the phone password when you
switch the phone on.
] Off: You do not need to enter the phone password when you
switch the phone on.
n Note Before disabling the PIN code request feature, you must enter
your PIN.
Select line
(SIM dependent)
(Menu-9-4-7)
This menu is shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which phone line
(between Line 1 and Line 2) you want to use for making calls and
sending short messages. Calls on both lines can be answered
irrespective of the selected line.
Closed user group
(Network dependent)
(Menu-9-4-8)
Restricts usage of the phone with numbers that belong to certain
user groups. When this function is used, every outgoing call is
associated with a group index. If a group index is specified, it is
used for all outgoing calls. If no group index is specified, the
network will use the preferential index (a specific index that is
stored in the network).
] Default: Activates the default group agreed on with the network
operator.
] Set: Select this to activate the selected CUG Index.
] Edit: You can edit the CUG name and CUG Index.
] Delete: Delets the selected CUG.
] Delete all: Delets all CUG.
n Note You will not be able to make calls if you select Line 2 and have
not subscribed to this network service.