Filter
Top Products
29
Operation
Setting the Display Brightness
You can adjust the brightness of the display window.
Press RECEIVER, and then press DIMMER on the
remote control repeatedly.
The brightness of the display window is on/off.
Using the Mute Function
You can temporarily mute the output of the unit.
Press RECEIVER, and then press MUTE.
The output is muted and the “MUTE” flashes in the
display window.
To cancel it, press the MUTE again, or adjust the
volume.
Using the Sleep Timer
With the sleep timer, you can set the unit to turn
off automatically after a specified period.
1. Press RECEIVER, and then press SLEEP
repeatedly to select the required sleep time.
The SLEEP indicator and the sleep time appears
in the display window.
2. Each time you press SLEEP the setting
changes in the following order.
SLEEP 180 →150 →120→90 →80 → 70 → 60→
50 → 40 → 30 → 20 →10 →OFF (No display)
The specified sleep time minute appears on the
display for about five seconds, then the previous
display reappears.
Note
To check the remaining time before the unit sleeps.
press SLEEP.
- The remaining time appears for about five seconds
in the display window.
Displaying Source Information
You can display various information about the current
input source.
Press RECEIVER, and then press DISPLAY
repeatedly to cycle through the available
information.
Note
The following information can typically be displayed
for input sources in the display window.
Input source &
Input mode
Listening mode
Surround Channel
values* & Signal
format
* Interpreting Surround Channel values
A: The number of front channels (3 means front
left, front right, and center).
B: The number of surround channels (2 means
surround left and surround right). If there’s
surround center channel information, this will be
3.
C: Subwoofer (1 means yes).
3/2.1
ABC
DVD Opt.1
Analog
DSP BYPASS
3/2.1