Filter
Top Products
Lexicon
10
In a mono situation (live or laying down a mono track), try running the effects
through only the right side (100% wet). This allows you to have two guitar feeds.
The left is totally dry guitar, the right is guitar effects. In a live situation, this gives
you the flexibility of adjusting the dry/effect balance from the console. When
recording, it allows you to track with the effect and adjust the balance during the
mix.
You can also think of this as a mono parallel loop. The right channel is unaffected
guitar tone, the left channel is the effects level.
Split Loop Examples
Rear Panel
Guitar Input
Your guitar can be connected to the Signature 284 via either the front or rear
panel input jacks. The rear panel input is provided as a convenience for custom
installations. Plugging into the front panel input overides any input connected at
the rear panel input.
Creating a Split Loop with a Mono Effect
inserted in the Signature 284 Effects Loop
You must use the
Right Return.
Rear Panel Connections