Filter
Top Products
Recording Using the Microphone/Line Input
25
Rewind and Play Buttons
5. Turn the Alpha Studio™ Output Level knob to adjust the listening volume, and
make sure the Monitor Mix knob is somewhere in the middle between Direct and
Playback.
To overdub a second track:
1. Click the Project menu and select Add Track > Audio. When the Add Audio Track
dialog appears, make sure the Configuration option is set to Mono and click OK.
2. Click anywhere in the gray area (not on the buttons) of the Audio 02 window
you just added.
3. In the Inspector, click on the Left - Stereo In box and select Stereo In > Right
for the track input source. (Stereo In - Left relates to Line 1/Inst, Stereo In -
Right relates to Line 2/Mic inputs.)
4. In the Audio 02 window, the Record Enable button should already be red.
If it isn't, click it so that it turns red.
5. In the Audio 02 window, click the Input Monitoring button so that it is not
lit.
To set monitor levels for a comfortable listening level:
1. On the front of the Alpha Studio hardware, locate the Monitor Mix knob.